A broken mirror will not only be the reason for harm to the person but also is a sign of negativity. No matter in which part of the house the mirror is located, the broken mirror will affect the overlook of the place. Has your mirror broken? If yes, you can either get the mirror repaired or throw it in the garbage.

If you have decided to get the Mirror repair, you must follow some basic steps. Now we will discuss in detail the guidance that will help to get the cracked mirror repaired:

1. Proper Cleaning Of the Mirror

Before a person repairs the mirror, proper cleaning should be done. The person can use the microfiber cloth that will help to remove the unwanted dirt and dust from the broken mirror. For better cleaning, the person can use a professional cleaner like the Windex or homemade cleaner made by mixing water and vinegar.

2. Application of The Stabilizer Film

Once the person does the proper cleaning of the mirror, then with the help of the stabilizer film, the person can remove the adhesive backing. The removal of the adhesive back should be appropriately done by avoiding sticking it to the film.

Then the stabilizer film is placed in the broken place and then pressed carefully.

3. Apply the Epoxy Resin To Cracked Parts

After applying the stabilizer film to the broken parts, the person can apply the epoxy resin to that part. This is the resin that comes in the plastic syringe applicator. To apply it perfectly, lift the stabilizer slightly and then carefully add the resin beneath the film.

4. Leave The Mirror For Some Time

As the epoxy resin is in liquid form, it will take the proper time to dry. As usual, the time taken by the resin to get dry is between 20 to 40 minutes. A person can even set a reminder of 25 minutes to do frequent checking. While Mirror repair, it must be placed on a flat surface to dry the resin quickly.

5. Peel Off the Stabilizer Film

Just peel off the stabilizer film once the epoxy gets dried completely and hardened over the repair. If you cannot do the peeling of the film with the help of a hand, you can use the knife to complete the procedure. A person should use a firm motion to take off the film properly.

6. Scrape Excess Of The Resin

This is a difficult task; a person should wear gloves in advance only. However, the person can then take the knife or the razor to remove the excess of the resin, and then you will notice that the mirror is repaired correctly.

Hopefully, it is quite clear that the steps to be followed to Mirror repair are so simple that a person can easily follow them. At last, he can do the proper cleaning of the glass and use it as he wishes to. Of course, a person should complete the procedure with safety to avoid any mishappening.