To split one mirror into two or put up the glass in the frame, glass and mirror cutting are required in both aspects. Nowadays, a mirror and glass cannot only be cut with a glasscutter, instead, but there are also many more ways through which a glass can be cut into pieces or shapes easily such as with scissors, string, and wire. As the mirror and glass are very sharp objects and can lead to harm, it’s advisable to hire professionals from diamond glass and mirror for availing the glass cutting services. They are not only perfectionists and reliable in cutting a square or rectangle glass and mirror, rather they can cut any shape easily and with perfection.

Moreover, if you wish to learn the method of glass and mirror cutting to be done by yourself or want to know the procedure that a specialist follows to cut the glass.  Read the article below

Follow the step by step process to cut the glasses and mirrors

1- Clean the area

A glass cleaner is being required to clean the glass and mirror from both sides. Also, make sure that you have cleaned all the tools which you require just like professionals do. Because if any dirt or residue is left on the mirror and glass, it will interrupt your mirror cutting process.

2- Set up your workstation

It means that you have to arrange your mirror cleaning and the necessary tools up on the table to smother your mirror cutting procedure. But make sure to cover up the table with a newspaper, fabric, or butcher paper for reducing probable bumps during cutting.

3- Measure up

Now, take your measuring tool and use it to mark and measure the glass and mirror up to how you desire to cut through a marking pencil.

4- Time to score

Now put up your goggles and mittens and put the cutting tool in use along with a straight edge for marking the mirror and glass as per your measurements. But remember that if you imply much pressure, it may cause the glass and mirror to break down and if implied less then you might not get the desired results. Record in a solitary motion and don’t make multiple scores with a straight edge.

5- Snap with care

As the scoring is completed, put your straight edge down and slide a towel inside the mirror and glass after assuring that it gets the full length of the score. Place a hand on one side of the towel and press downwards. You will see the mirror and glass snap along the scored line.

6- Avoid fragments

Now place some cardboard and fabric in the plier’s jaws and carefully break off the mirror pieces. This way it will prevent the fragments.

Conclusion

Follow the above process if you desire to cut the glass on your own, or if you want to know the procedure specialists from diamond glass and mirror follows, learn from the article given above.