Any area in the house may benefit from the usage of beveled mirror tiles to increase the visual space. Mirror tiles may be used to make enormous wall mirrors, ornamental mirrors, or even murals. They are available in a standard silver-backed mirror finish, and one option to utilize them is to create enormous, segmented mirrors in bathrooms, bedrooms, and corridors and Install Beveled Mirror.

Let us now look at how to put these mirror glass tiles together!

Needed Items

• Soap for dishes
• Sponge
• Tape measure
• Carpenter’s skillset
• Sandpaper
• Primer for mirror tile glue
• Paintbrush with a roller
• Glue for mirror tiles
• Trowel with a notch
• 1/4-inch thick double-sided mirror tape with 1-inch squares
• Cleaning rag or paper towel

Installation Procedures

Step 1: Clean the wall where the beveled mirror tiles will be installed with warm soapy water.

Step 2: Prepare the wall where the tile will be laid by sanding it. The rough surface will aid the adhesion of the adhesive to the wall.

Step 3: Arrange the beveled mirror tiles in the preferred installation pattern on a level work surface. With a pencil, measure the length and breadth of the pattern and transfer the dimensions to the wall. To guarantee that the lines you draw on the wall are straight and even, use a carpenter’s level.

Step 4: Using a roller paintbrush, apply a uniform coating of mirror adhesive primer/sealer to the wall. Allow the primer to dry for 40 minutes.

Step 5: Using a notched trowel, apply a uniform layer of mirror tile adhesive to the wall according to the packing directions. Before placing the tile, allow for the required setting time.

Step 6: For every 12 inches of mirror tile, apply four double-sided mirror tape squares. Place a piece of double-sided mirror tape near each corner of your beveled mirror tile if it is less than 12 inches in length. Remove one side of the tape’s plastic cover and push it into the back of the glass. The tape keeps the mirror tile in place while the glue dries.

Step 7: Remove the plastic cover off the top of the beveled mirror tile’s double-sided tape. Place the beveled mirror tile in the installation area’s upper corner. Press the back of the tile into the glue gently but firmly. To get the tile to attach to the wall, you may need to slide it in position. Using the sketched installation lines as a guide, place all of the beveled mirror tiles on the wall. Wipe away any excess glue with a moist paper towel or a clean wet cloth on the front surface of the mirror tile and Install Beveled Mirror.

Hanging a Frameless Beveled Mirror on a Wall

Moving from one home to another has numerous obstacles, and you will have to cope with them all, no matter how large or tiny they are. However, removals in Bicester, a reputable firm in the UK, have made the entire moving procedure easier, allowing you to rest and focus on other minor tasks such as hanging a frameless mirror in your new house.