Right now, the minimalist trend in interior design is all the rage. If you keep up with current interior design trends, you have probably noticed how trendy frameless showers doors have become. They are very common in contemporary and modern bathrooms. The sleek and sophisticated elegance that these glass doors provide is the sole reason for their tremendous demand. So, if you are thinking about starting a bathroom renovation project, this is the one to choose. The following instructions will show you how to install a frameless shower door. Shower doors, both frameless and framed, are often constructed of tempered glass that has been treated to make cleaning easier. The thickness of the glass is the fundamental difference between the two. Because the glass is supported by a frame, framed shower doors have smaller proportions. As a result, the frame itself is made of a range of materials, including aluminum. The glass will then be sealed into the frame to prevent any leakage.

Frameless showers doors, on the other hand, have substantially thicker panes because there is no frame to hold them. Manufacturers utilize hinges, clamps, or door pulls to keep them in place. They then use silicone to caulk these tools at the corners to keep the glass in place. The shower door will have a rubber extension at the bottom to prevent water from leaking outside.

There are a few things to think about before you start installing your shower door. Not only will planning assist you in overcoming any obstacles, but it will also ensure the installation’s success.

Make Accurate Measurements

This is a really important phase. To ensure that you have the correct proportions, you should measure everything at least twice. Any frameless door that is not level will fracture and break. This is also important that you can properly place the brackets and prevent damaging the glass.

Angles should be noted

Angles in your bathroom are important, so measure them as well. Keep in mind that your shower should be constructed in a way that incorporates both modern and traditional elements.

Specifically, 90°, 135°, or 180°. Because most hardware is standardized to those specific numbers, this is the case. Anything over or below will necessitate specialized appliances, thus increasing the project’s cost.

The verticality of the wall must be exact

The last thing you want when installing frameless glass doors is empty corners and gaps. To eliminate this problem entirely, double-check that your wall is perfectly vertical. If it is not, you will definitely need a matching filler strip.

Make a rough sketch of your project

Making a sketch of your shower is the finest thing you can do before diving into the installation. Include all of your measurements, as well as a side view.

Ordering a Shower Door from us

If you need a bespoke glass shower door, simply follow these simple steps to create one that matches your bathroom’s decor.